Multi-Machine Operator X6 Vacancies 2026 | Morupule Coal Mine | Palapye | Apply by 23 August 2026
Morupule Coal Mine (MCM) is inviting applications from suitably qualified and experienced candidates for six (6) Multi-Machine Operator positions in Botswana.
The positions require candidates who can safely operate multiple types of heavy mining equipment, including Excavators, Dump Trucks, Dozers and Drill Rigs. Applicants must hold an appropriate MTTC Machine Operator Competence Certificate and be certified on at least two of the specified machines.
Job Details
Position: Multi-Machine Operator
Number of Vacancies: X6
Company: Morupule Coal Mine (MCM)
Location: Palapye, Botswana
Industry: Mining
Job Category: Mining Operations / Heavy Equipment
Minimum Education: O’ Level/BGCSE or equivalent
Experience: Minimum 2 years relevant experience
Closing Date: 23 August 2026
Job Purpose
The Multi-Machine Operator will be responsible for safely and efficiently operating a range of mining equipment in accordance with Morupule Coal Mine standards, statutory requirements and approved operating procedures.
Equipment covered by the position includes:
- Excavators
- Dump Trucks
- Dozers
- Drill Rigs
Candidates need competency certification in at least two (2) of these frontline mining machines.
Key Duties and Responsibilities
Successful candidates will be expected to:
- Conduct workplace and task-specific risk assessments before beginning work.
- Follow established safety procedures and statutory requirements.
- Conduct comprehensive pre-start and visual equipment inspections.
- Identify equipment defects and determine operational readiness.
- Report defects to the relevant supervisor.
- Guide and signal haul trucks into and out of loading positions.
- Maintain safe and efficient traffic movement around loading areas.
- Load material into haul trucks according to operating procedures.
- Ensure correct payloads while minimising spillage.
- Protect equipment against unnecessary damage.
- Operate dump trucks to transport materials to designated tipping points or ROM stockpiles.
- Follow mine haul-road rules and speed limits.
- Operate dozers to maintain loading areas and manage spillage.
- Maintain required bench and floor elevations.
- Operate drill rigs according to approved drilling patterns and depths.
- Support effective blasting outcomes through accurate drilling.
- Coordinate support equipment to maintain safe and productive working areas.
- Maintain correct floor and bench levels using applicable machine systems and guidance.
- Perform housekeeping and minor manual duties.
- Clean machine cabs and external components.
- Safely tram machinery between work locations.
- Follow mine traffic regulations.
- Use fleet-management and monitoring systems.
- Record production information accurately.
- Report operational delays and equipment-related problems.
Minimum Requirements
Applicants must have:
Education
- O’ Level/BGCSE Certificate or equivalent
Machine Operator Certification
- Valid Madirelo Training & Testing Centre (MTTC) Machine Operator Competence Certificate
Candidates must have MTTC competency certification in at least two (2) of the following:
- Excavator
- Dump Truck
- Dozer
- Drill Rig
Experience
- Minimum 2 years’ proven experience operating heavy mining equipment
Relevant experience should include operation of equipment such as:
- Excavators
- Drill Rigs
- Dump Trucks
- Dozers
Safety Knowledge
Candidates should have an understanding of SHE Management Systems, including:
- ISO 45001:2018
- ISO 14001:2015
Skills and Competencies
Suitable candidates should demonstrate:
- Safe heavy-equipment operating practices
- Strong awareness of mine safety requirements
- Equipment inspection abilities
- Hazard identification and risk assessment
- Understanding of loading and hauling operations
- Ability to follow mine traffic regulations
- Good communication skills
- Ability to follow operating procedures
- Equipment defect identification and reporting
- Ability to use fleet-management systems
- Good housekeeping practices
- Ability to work effectively within a mining operations team
Remuneration
Morupule Coal Mine states that it offers a competitive remuneration package commensurate with qualifications and experience.
The specific salary amount was not provided in the vacancy information.
How to Apply
Candidates who meet the requirements must prepare the following:
- Cover letter
- Comprehensive Curriculum Vitae (CV)
- Certified copies of educational certificates
- Certified copies of relevant machine competency certificates
- Certified copy of identity card
- Certified copy of driver’s licence, where required
Applications must be addressed to:
Head of Human Resources
Morupule Coal Mine
Private Bag 35
Palapye, Botswana
Applications should be submitted by email to:
Email Subject Line
Clearly state the position you are applying for in the subject line, for example:
APPLICATION: MULTI-MACHINE OPERATOR
Closing Date
23 August 2026
Important Application Instructions
Morupule Coal Mine specifically states:
- Do not submit applications by fax.
- Do not hand-deliver applications.
- Applications should be submitted using the specified email application method.
- Ensure all required certified documents are attached.
- Clearly state the position in the email subject line.
- Only shortlisted candidates will be contacted for interviews.
Employment Equity & Inclusion
Morupule Coal Mine states that it is committed to fostering a diverse, equitable and inclusive workplace where candidates have equal opportunities to succeed.
Suitably qualified candidates from different backgrounds are encouraged to apply.
Frequently Asked Questions (FAQ)
1. How many Multi-Machine Operator positions are available?
There are six (6) vacancies.
2. Where are the positions based?
The vacancies are with Morupule Coal Mine in Palapye, Botswana.
3. What is the minimum education requirement?
Applicants require an O’ Level/BGCSE Certificate or equivalent.
4. Do I need an MTTC certificate?
Yes. Applicants require a valid Madirelo Training & Testing Centre (MTTC) Machine Operator Competence Certificate.
5. How many machines must I be certified to operate?
You need MTTC competency certification for at least two of the four specified machines: Excavator, Dump Truck, Dozer or Drill Rig.
6. Can I apply if I can only operate a dump truck?
Based on the advertised requirements, certification on only one machine would not satisfy the requirement. Candidates need competency certification in at least two of the listed machines.
7. How much experience is required?
Applicants need a minimum of two years’ proven experience operating heavy mining equipment.
8. Do I need previous mining experience?
The vacancy specifically seeks candidates with proven experience operating heavy mining equipment, so relevant practical mining/heavy-equipment experience is important.
9. What documents must accompany my application?
You should submit a cover letter, comprehensive CV, certified educational certificates, certified relevant competency certificates, certified identity document and a certified driver’s licence where required.
10. Can I hand-deliver my CV to Morupule Coal Mine?
No. The advert specifically states no hand-delivered applications.
11. Can I send my application by fax?
No. Applications sent by fax will not be accepted.
12. What should I put in the email subject line?
State the position you are applying for, such as “MULTI-MACHINE OPERATOR.”
13. What is the closing date?
Applications close on 23 August 2026.
14. Will everyone who applies be contacted?
No. The advert states that only shortlisted candidates will be contacted for interviews.
Possible Interview Questions
These questions are based on the advertised responsibilities and are not confirmed Morupule Coal Mine interview questions.
1. Which mining machines are you certified to operate?
Clearly identify your MTTC certifications and explain how much practical experience you have on each machine.
2. Walk us through the pre-start inspection you perform before operating heavy mining equipment.
Discuss visual inspection, fluid levels, tyres or tracks, safety systems, controls, leaks, structural damage and reporting defects.
3. What would you do if you discovered a serious defect during a pre-start inspection?
Emphasise safety, reporting the defect and following mine procedures rather than operating unsafe equipment.
4. Explain how you safely load a haul truck using an excavator.
Discuss positioning, communication, correct payload, avoiding spillage and following established loading procedures.
5. What safety precautions do you take when operating a dump truck?
Mention speed limits, haul-road rules, safe following distances, awareness of other equipment and correct tipping procedures.
6. What experience do you have operating a dozer?
Explain the work you have performed, such as maintaining loading areas, clearing spillage and maintaining floor or bench levels.
7. What experience do you have operating drill rigs?
Discuss drilling patterns, required depths, equipment checks and adherence to approved procedures.
8. What is a task-specific risk assessment, and why is it important?
Explain how identifying hazards before starting work helps determine appropriate controls and reduces the likelihood of incidents.
9. What do you understand about ISO 45001:2018 and ISO 14001:2015?
Prepare to discuss their relevance to occupational health and safety and environmental management.
10. What would you do if another operator entered your working area unexpectedly?
Focus on stopping or controlling the operation safely, communicating with the operator and following site traffic and safety procedures.
11. How do you minimise equipment damage and unnecessary wear?
Discuss correct operation, pre-start checks, observing machine limits, identifying defects early and following manufacturer/site procedures.
12. How do you manage fatigue when operating heavy equipment for long periods?
Discuss following shift and break requirements, remaining alert and reporting when you are not fit to operate safely.
13. Have you used a fleet-management or equipment-monitoring system before?
If yes, explain how you used it to record production, communicate information or report delays. If not, be truthful and explain your willingness to learn.
14. Why should Morupule Coal Mine appoint you as a Multi-Machine Operator?
Connect your MTTC certifications, heavy-equipment experience, safety awareness, reliability and ability to operate multiple machines to the advertised requirements.
SA Jobs Direct is an independent job information website. We are not affiliated with, endorsed by, sponsored by, or acting on behalf of the employer mentioned in this listing unless expressly stated.
Vacancy information is summarised from publicly available recruitment sources for informational purposes. Applicants should verify the vacancy details and submit their applications through the employer's official careers website or authorised recruitment platform.
SA Jobs Direct does not recruit, interview, charge application fees, or accept applications on behalf of the employer.
Are you the employer or have you found inaccurate, expired, misleading, or potentially infringing information? Report this listing and we will investigate it promptly.